PoE Adaptor - 48v
[Peplink AP One In-Wall](https://cmo-online.ca/products/peplink-ap-one-in-wall-wifi-access-point)
versi utama di googling, tak di publish lagi
The Peplink AP One In-Wall is a specialized, plenum-rated Wi-Fi access point that mounts directly into standard single-gang electrical wall boxes. It eliminates visual clutter and loose cables, making it ideal for hotels, dorms, and offices. It also includes a localized management controller for easy deployment. [1, 2, 3, 4, 5]
Key Features and Specifications
- Discrete Design: Installs flush against the wall on US or EU/Worldwide single-gang wall jacks.
- Centralized Management: Managed via a built-in AP Controller (found on Peplink Balance and MAX routers) or centrally through the cloud via InControl2.
- Plenum Rated: Fire-resistant, allowing for safe placement in building air-handling spaces.
- Network Modes: Supports Bridge, Router (NAT), and Wireless Distribution System (WDS) modes. [1, 3, 4, 6, 7]
Typical Use Cases
Because the AP One In-Wall is designed to blend seamlessly into interior environments while providing localized network access, it is commonly utilized to add discreet Wi-Fi and wired Ethernet drops in specific rooms without running large bundles of cable. [1, 2, 3, 8] Would you like to explore pricing and purchasing options, or are you looking for help with configuring the In-Control platform for your access point?
[1] https://rising.au [2] https://www.4gon.co.uk [3] https://www.peplink.com [4] https://www.peplinkworks.com.au [5] https://store.omadanetworks.com [6] https://www.peplinkworks.com [7] https://www.peplinkworks.com.au [8] https://www.startech.com
yes, please
The Peplink AP One In-Wall (APO-AGN2-IW) can be acquired through authorized distributors, and configured using Peplink's management ecosystem. [1, 2]
Pricing and Purchasing Options
The standard retail price sits at $299.00, though costs can vary depending on volume or individual vendor promotions. Because Peplink targets commercial and industrial deployments, they prioritize fulfillment via specialized wireless infrastructure partners rather than standard retail channels. [2, 3]
- Peplink APO-AGN2-IW: Available for order via industrial networking merchants like the Orbital Connect Store and authorized platform dealers like PeplinkWorks.com. [1, 2]
- Power Note: It relies on standard 802.3af Power over Ethernet (PoE). A PoE injector or PoE switch port is required for setup, as a power supply is not included in the baseline retail box. [1, 4]
Step-by-Step Cloud Configuration via InControl2
To onboard the AP One In-Wall to your InControl2 Cloud Management Platform, follow these sequential deployment steps:
- Retrieve Device Credentials: Locate the serial number, MAC address, and default administration password stamped on the back or bottom panel of the physical unit. [5]
- Add Device to InControl2: Log into your organization's InControl2 Dashboard, select your specific Group, click on Device Management, and choose Add Device to input the serial number.
- Provision the Group Wi-Fi Profile: Navigate to Wi-Fi AP > Group Wide Wi-Fi Settings within the cloud console to build a master configuration profile. [6]
- Define Network Parameters: Configure your primary network names (SSIDs), broadcast security protocols (e.g., WPA3 Enterprise or WPA2 Personal), and assign specific local VLAN IDs. [6, 7]
- Connect and Sync Hardware: Insert the Ethernet drop into the rear PoE LAN port. Once powered up and provisioned with an internet connection, the hardware will automatically reach out to the cloud, pull down its assigned system profiles, and begin broadcasting your network profiles. [8, 9, 10]
If you are expanding an existing footprint, would you like to verify if your current Peplink Balance/MAX local router controller has enough available licenses to manage this device locally without the cloud? [6]
[1] https://www.peplinkworks.com [2] https://store.orbitalconnect.com [3] https://www.peplink.com [4] https://www.4gon.co.uk [5] https://support.mobilemusthave.com [6] https://www.peplink.com [7] https://www.peplink.com [8] https://rising.au [9] https://www.peplinkworks.com [10] https://www.peplink.com
what specification for Volt and Ampere ?
The IEEE 802.3af (PoE) standard operates at a nominal voltage of 48V DC and provides a maximum current of 350 mA (amperes). [1, 2, 3] Because electrical power drops as it travels down an Ethernet cable, the standard defines distinct voltage and power envelopes for both the supply end and the receiving device: [1, 4, 5]
| Metric | Power Sourcing Equipment (PSE / Switch) | Powered Device (PD / Peplink AP) |
|---|---|---|
| Voltage Range | 44.0V – 57.0V DC | 37.0V – 57.0V DC |
| Max Amperage | 350 mA | 350 mA |
| Max Power (Wattage) | 15.4 W | 12.95 W |
Why this matters for your Peplink AP One
- Safe Delivery: Any active 802.3af/at PoE switch port will automatically negotiate this correct voltage before sending power. This prevents frying the hardware. [6, 7]
- Passive Warning: Do not use cheap "passive" 24V PoE injectors. They do not supply the required voltage and can permanently damage the access point. [6]
Are you planning to deploy this device using a centralized network switch, or do you need a recommendation for a standalone single-port PoE injector?
[1] https://en.wikipedia.org [2] https://www.ionos.com [3] https://resources.l-p.com [4] https://www.phihong.com [5] https://support.visiotechsecurity.com [6] https://support.omadanetworks.com [7] https://things-embedded.com
standalone single-port PoE injector
To power the Peplink AP One In-Wall safely via a single-port setup, you need an active IEEE 802.3af-compliant Gigabit PoE injector that safely provides 48V DC. Using a non-Gigabit injector will bottleneck your access point's internet speed to just 100 Mbps. [1, 2, 3, 4] The following single-port options deliver the exact power negotiation and data throughput required by the hardware:
Top Standalone 802.3af PoE Injectors
This active adapter automatically determines power requirements and safely supplies up to 15.4W of power over standard Ethernet drops. It features a compact plastic body, dedicated LED indicators, and includes the wall power adapter in the retail packaging. You can check availability directly on the Omada Network Store or via electronic sellers on Tokopedia. [5, 6, 7, 8, 9]
A highly popular choice engineered for premium access points, delivering a steady 48V DC at 0.32A (roughly 15W). It includes robust surge, clamping, and maximum discharge protection built into the chassis to shield your network hardware from unexpected power spikes. Listings can be browsed on shopping platforms like Blibli or Shopee Indonesia. [10, 11, 12, 13, 14]
This active Gigabit option uses internal auto-sensing loops to deliver the exact required power envelopes to connected hardware up to 100 meters away. It features a simple plug-and-play profile with integrated over-current protection mechanics. Detailed specifications can be verified on the official TRENDnet Product Page. [15, 16, 17, 18]
How to Hook It Up
- Connect an Ethernet cable from your non-PoE router or switch into the port labeled Data In / LAN on the injector.
- Plug the injector's power cord into a standard wall outlet.
- Run a solid copper Cat5e or Cat6 cable from the port labeled PoE / Data Out directly to the rear port of the Peplink In-Wall AP. [1, 10, 19]
Do you need help calculating the maximum Ethernet cable distance you can safely run from the power outlet to where the in-wall access point will be mounted?
[1] https://www.getic.com [2] https://www.cytron.io [3] https://global.linovision.com [4] https://www.fastcabling.com [5] https://www.commandonetworks.com [6] https://www.tokopedia.com [7] https://store.omadanetworks.com [8] https://www.youtube.com [9] https://www.senetic.ie [10] https://www.tokopedia.com [11] https://www.wifi-stock.com [12] https://wifigear.co.uk [13] https://www.liberia.ubuy.com [14] https://www.wlan-shop24.de [15] https://www.trendnet.com [16] https://www.amazon.in [17] https://www.ubuy.com.jo [18] https://www.trendnet.com [19] https://planetechusa.com